{"id":1608,"date":"2020-12-06T21:58:22","date_gmt":"2020-12-06T21:58:22","guid":{"rendered":"http:\/\/ekipsteel2.sentezyum.info\/?page_id=1608"},"modified":"2021-09-10T11:06:22","modified_gmt":"2021-09-10T08:06:22","slug":"surface-standards","status":"publish","type":"page","link":"https:\/\/ekipsteel.com\/en\/surface-standards\/","title":{"rendered":"Surface Standards"},"content":{"rendered":"

<\/div><\/div><\/span>

Ekip Steel surface standards<\/span><\/span><\/h2><\/span>
<\/div><\/div><\/div><\/div><\/div>
<\/div><\/div><\/div><\/div>
<\/div><\/div><\/span>

F1<\/h1><\/span>
<\/div><\/div><\/div><\/div><\/div>

It is also called hot surface or NO:1. It is hot drawn, annealed, matte surface. It is uneven than a 2D or 2B (matte) surface. It is used in areas where visual quality is not important. It has a standard surface for thicknesses above 8mm.<\/p>\n<\/div><\/div><\/div>

<\/a><\/span><\/div><\/div><\/div><\/div><\/div>
<\/div><\/div><\/span>

2D<\/h1><\/span>
<\/div><\/div><\/div><\/div><\/div>

It is cold-drawn, annealed, cleaned, and slightly polished. It has a glossy surface between a matte and a warm surface.<\/p>\n<\/div><\/div><\/div>

<\/a><\/span><\/div><\/div><\/div><\/div><\/div>
<\/div><\/div><\/span>

2B<\/h1><\/span>
<\/div><\/div><\/div><\/div><\/div>

It is also called a matte surface. It is cold-drawn, annealed, cleaned, and slightly polished. It has a standard surface in thicknesses up to 8 mm.<\/p>\n<\/div><\/div><\/div>

<\/a><\/span><\/div><\/div><\/div><\/div><\/div>
<\/div><\/div><\/span>

3N<\/h1><\/span>
<\/div><\/div><\/div><\/div><\/div>

It is the surface obtained by applying the satination process on a cold-drawn matte surface. It is also called the ground surface. They are 3N thick ground surfaces. It is used in decorative areas.<\/p>\n<\/div><\/div><\/div>

<\/a><\/span><\/div><\/div><\/div><\/div><\/div>
<\/div><\/div><\/span>

4N<\/h1><\/span>
<\/div><\/div><\/div><\/div><\/div>

It is the surface obtained by applying the satination process on a cold-drawn matte surface. It is also called the ground surface. They are 4N finer ground surfaces. It is used in decorative areas.<\/p>\n<\/div><\/div><\/div>

<\/a><\/span><\/div><\/div><\/div><\/div><\/div>
<\/div><\/div><\/span>

YSB<\/h1><\/span>
<\/div><\/div><\/div><\/div><\/div>

It is the surface obtained by applying the scrubbing process on a cold-drawn matte surface. It is also called SB (scotch brite) surface. It is used in decorative areas.<\/p>\n<\/div><\/div><\/div>

<\/a><\/span><\/div><\/div><\/div><\/div><\/div>
<\/div><\/div><\/span>

ESB<\/h1><\/span>
<\/div><\/div><\/div><\/div><\/div>

It is the surface obtained by applying the scrubbing and very fine satination on a cold-drawn matte surface. It is also called SB (scotch brite) surface. It is used in decorative areas.<\/p>\n<\/div><\/div><\/div>

<\/a><\/span><\/div><\/div><\/div><\/div><\/div>
<\/div><\/div><\/span>

HL<\/h1><\/span>
<\/div><\/div><\/div><\/div><\/div>

It is the surface obtained by applying the scrubbing and very fine satination on a cold-drawn matte surface. It is also called a hairline surface. It is used in decorative areas.<\/p>\n<\/div><\/div><\/div>

<\/a><\/span><\/div><\/div><\/div><\/div><\/div>
<\/div><\/div><\/span>

BA<\/strong><\/h1><\/span>
<\/div><\/div><\/div><\/div><\/div>

It is also called glossy surface or 2R. They are cold-drawn, annealed, and polished surfaces. It is used in decorative areas.<\/p>\n<\/div><\/div><\/div>

<\/a><\/span><\/div><\/div><\/div><\/div><\/div>
<\/div><\/div><\/span>

8K<\/strong><\/h1><\/span>
<\/div><\/div><\/div><\/div><\/div>

It is also called a mirror surface. They are polished and mirror-like surfaces. It is included in the decorative stainless-steel group.<\/p>\n<\/div><\/div><\/div>

<\/a><\/span><\/div><\/div><\/div><\/div><\/div>
<\/div><\/div><\/span>

2M<\/strong><\/h1><\/span>
<\/div><\/div><\/div><\/div><\/div>

It is also called a dot pattern. It is in the patterned hairline group. It is mostly used in the elevator industry.<\/p>\n<\/div><\/div><\/div>

<\/a><\/span><\/div><\/div><\/div><\/div><\/div>
<\/div><\/div><\/span>

5M<\/strong><\/h1><\/span>
<\/div><\/div><\/div><\/div><\/div>

It is also called a diagonal square pattern. It is in the patterned hair group. It is mainly used in the elevator industry.<\/p>\n<\/div><\/div><\/div>

<\/a><\/span><\/div><\/div><\/div><\/div><\/div>
<\/div><\/div><\/div><\/div><\/div><\/div>
<\/div>
<\/div><\/div><\/span>

Stainless steel surface standards<\/h2><\/span>
<\/div><\/div><\/div><\/div><\/div>
<\/div><\/div><\/div><\/div>
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
EK\u0130P STEEL<\/strong><\/td>\nASTM<\/strong><\/td>\nEN<\/strong><\/td>\nDIN<\/strong><\/td>\nTYPE OF PROCESS ROUTE<\/strong><\/td>\nSURFACE FINISH<\/strong><\/td>\nEXPLAINATION<\/strong><\/td>\n<\/tr>\n<\/thead>\n
F1<\/td>\n1<\/td>\n1D<\/td>\nC2\/lla<\/td>\nHot rolled, heat treated, pickled<\/td>\nFree of scale<\/td>\nUsually standard for most steel types to ensure good corrosion resistance; also common finish for further processing. It is permissible for grinding marks to be present. Not as smooth as 2D or 2B.<\/td>\n<\/tr>\n
2D<\/td>\n2D<\/td>\n2D<\/td>\nh\/lllb<\/td>\nCold rolled, heat treated, pickled, skin passed<\/td>\nSmoother than 2B<\/td>\nMost common finish for most steel types to ensure good corrosion resistance, smoothness and flatness. Also common finish for further processing. Skin passing may be by tension levelling.<\/td>\n<\/tr>\n
2B<\/td>\n2B<\/td>\n2B<\/td>\nh\/llc<\/td>\nCold rolled, heat treated, pickled, skin passed<\/td>\nSmoother than 2D<\/td>\nMost common finish for most steel types to ensure good corrosion resistance, smoothness and flatness. Also common finish for further processing. Skin passing may be by tension levelling.<\/td>\n<\/tr>\n
3N<\/td>\n3<\/td>\n2G<\/td>\no\/IV<\/td>\nCold rolled, heat treated, satin polish (rough)<\/td>\nGrinded<\/td>\nGrade of grit or surface roughness can be specified. Unidirectional texture, not very reflective.<\/td>\n<\/tr>\n
4N<\/td>\n6<\/td>\n2J<\/td>\nP\/V<\/td>\nCold rolled, heat treated, satin polish (neat)<\/td>\nSmoother than ground<\/td>\nGrade of brush or polishing belt or surface roughness can be specified. Unidirectional texture, not very reflective.<\/td>\n<\/tr>\n
BA<\/td>\nBA<\/td>\n2R<\/td>\nm\/lld<\/td>\nCold rolled, heat treated, polish surface<\/td>\nSmooth, bright, reflective<\/td>\nSmoother and brighter than 2B. Also common finish for further processing.<\/td>\n<\/tr>\n
ESB<\/td>\n–<\/td>\n–<\/td>\n–<\/td>\nSo\u011fuk \u00e7ekilmi\u015f, tavlam\u0131\u015f,y\u00fczeyi temizlenmi\u015f, satine i\u015flemi uygulanm\u0131\u015f<\/td>\nSatin Polish<\/td>\nAdditional specific requirements to a “J” type finish, in order to achieve adequate corrosion resistance for marine and external architectural applications.<\/td>\n<\/tr>\n
YSB<\/td>\n4<\/td>\n2K<\/td>\n–<\/td>\nCold rolled, heat treated, pickled, satin polished<\/td>\nSatin Polish<\/td>\nAdditional specific requirements to a \u201cJ\u201d type finish, in order to achieve adequate corrosion resistance for marine and external architectural applications.<\/td>\n<\/tr>\n
HL \/ Hairline<\/td>\n–<\/td>\n–<\/td>\n–<\/td>\nCold rolled, heat treated, pickled, satin polished<\/td>\nSatin Polish<\/td>\nIt is only the surface that is brushed.<\/td>\n<\/tr>\n
8K<\/td>\n8<\/td>\n2P<\/td>\n–<\/td>\nPolished mirror glossy surface<\/td>\nMirror glossy<\/td>\nMechanical polishing.<\/span> Process or surface roughness can be specified.<\/span> Non-directional surface, reflective with high image clarity.<\/span><\/span><\/td>\n<\/tr>\n
1M \/ G\u00f6z ya\u015f\u0131 Desen<\/td>\n<\/td>\nM2<\/td>\n<\/td>\nPatterned<\/td>\nDesign to be agreed<\/td>\nA fine texture finish mainly used for achitectural applications.<\/td>\n<\/tr>\n
2M \/ Nokta Desen<\/td>\n<\/td>\nM2<\/td>\n<\/td>\nPatterned<\/td>\nDesign to be agreed<\/td>\nA fine texture finish mainly used for achitectural applications.<\/td>\n<\/tr>\n
3M \/ Micro Nokta Desen<\/td>\n<\/td>\nM2<\/td>\n<\/td>\nPatterned<\/td>\nDesign to be agreed<\/td>\nA fine texture finish mainly used for achitectural applications.<\/td>\n<\/tr>\n
4M \/ D\u00fcz Kare Desen<\/td>\n<\/td>\nM2<\/td>\n<\/td>\nPatterned<\/td>\nDesign to be agreed<\/td>\nA fine texture finish mainly used for achitectural applications.<\/td>\n<\/tr>\n
5M \/ \u00c7apraz Kare Desen<\/td>\n<\/td>\nM2<\/td>\n<\/td>\nPatterned<\/td>\nDesign to be agreed<\/td>\nA fine texture finish mainly used for achitectural applications.<\/td>\n<\/tr>\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n
<\/div><\/div><\/div><\/div><\/div><\/p>\n","protected":false},"excerpt":{"rendered":"","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"footnotes":""},"class_list":["post-1608","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/ekipsteel.com\/en\/wp-json\/wp\/v2\/pages\/1608","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/ekipsteel.com\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/ekipsteel.com\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/ekipsteel.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/ekipsteel.com\/en\/wp-json\/wp\/v2\/comments?post=1608"}],"version-history":[{"count":87,"href":"https:\/\/ekipsteel.com\/en\/wp-json\/wp\/v2\/pages\/1608\/revisions"}],"predecessor-version":[{"id":2506,"href":"https:\/\/ekipsteel.com\/en\/wp-json\/wp\/v2\/pages\/1608\/revisions\/2506"}],"wp:attachment":[{"href":"https:\/\/ekipsteel.com\/en\/wp-json\/wp\/v2\/media?parent=1608"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}